JKCI - Journal of the Korea Concrete Institute

1

ACI Committe 548 (1988) Guide for Mixing and Placing Sulfur Concrete in Construction. ACI Materials Journal 85(4), 314- 325.

2

Alhozaimy, A. M., Soroushian, P., and Mirza, F. (1996) Mechanical Properties of Polypropylene Fiber Reinforced Concrete and the Effects of Pozzolanic Materials. Cement and Concrete Composites 18(2), 85-92.

3

ASTM C191 (2008) Standard Test Methods for Time of Setting of Hydraulic Cement by Vicat Needle. West Conshohocken, PA; ASTM International.

4

Bae, S. G., Gwon, S. W., Kim, S. W., and Cha, S. W. (2014) Physical Properties of Sulfur Concrete with Modified Sulfur Binder. Journal of the Korean Society of Civil Engineers 34 (3), 763-771. (In Korean)

5

Bae, S. H. (1992) Characteristics of Sulfur Mortar and Concrete. Magazine of the Korea Concrete Institute 4(1), 58-61. (In Korean)

6

Cao, M., Xie, C., Li, L., and Khan, M. (2018) The Relationship between Reinforcing Index and Flexural Parameters of New Hybrid Fiber Reinforced Slab. Computers and Concrete, An International Journal 22(5), 481-492.

7

Cha, S. W., Kim, K. S., and Park, H. S. (2011) Manufacture of Modified Sulfur Polymer Binder and Characteristics of Sulfur Concrete. Magazine of the Korea Concrete Institute 23(6), 40-42. (In Korean)

8

Chen, Z., Wang, Y., Liao, S., and Huang, Y. (2020) Grinding Kinetics of Waste Glass Powder and Its Composite Effect as Pozzolanic Admixture in Cement Concrete. Construction and Building Materials 239, 117876.

9

Choe, M. S. (2012) Modified Sulfur Binder and the Fabrication Method thereof, Hydraulic Modified Sulfur Material Composition and the Fabrication Method thereof or Combustible Modified Sulfur Material Composition and the Fabrication Method thereof Containing the Modified Sulfur Binder (U.S. Patent No. 8, 207, 249). Washington, DC: U.S. Patent and Trademark Office.

10

Duecker, W. W. (1934) Admixtures Improve Properties of Sulfur Cements. Chemical and Metallurgical Engineering 41(11), 583-586.

11

Eren, F., Gödek, E., Keskinates, M., Tosun-Felekoğlu, K., and Felekoğlu, B. (2017) Effects of Latex Modification on Fresh State Consistency, Short Term Strength and Long Term Transport Properties of Cement Mortars. Construction and Building Materials 133, 226-233.

12

Ghasemi, Y., Emborg, M., and Cwirzen, A. (2019) Exploring the Relation between the Flow of Mortar and Specific Surface Area of Its Constituents. Construction and Building Materials 211, 492-501.

13

KATS (2017a) Flow Table for Use in Tests of Hydraulic Cement (KS L 5111). Seoul, Korea: Korea Agency for Technology and Standards (KATS), Korea Standard Association (KSA). (In Korean)

14

KATS (2017b) Polymer Modified Cement Mortar for Maintenance in Concrete Structure (KS F 4042). Seoul, Korea: Korea Agency for Technology and Standards (KATS), Korea Standard Association (KSA). (In Korean)

15

Khan, M., Cao, M., Chaopeng, X., and Ali, M. (2022) Experimental and Analytical Study of Hybrid Fiber Reinforced Concrete Prepared with Basalt Fiber Under High Temperature. Fire and Materials 46(1), 205-226.

16

Kim, K. H., Shin, D. C., Jung, H. J., Lee, J. N., and Kim, B. K. (2011) The Quality Properties of Mortar for Using Hydraulic Modification Sulfur as Admixture for Cement. Journal of Korean Recycled Construction Resources Institute 6(2), 81- 88. (In Korean)

17

Kobbe, W. H. (1924) New Uses for Sulfur in Industry. Industrial and Engineering Chemistry 16(10), 1026-1028.

18

Konsta-Gdoutos, M. S., Metaxa, Z. S., and Shah, S. P. (2010) Highly Dispersed Carbon Nanotube Reinforced Cement Based Materials. Cement and Concrete Research 40(7), 1052-1059.

19

Li, L., Khan, M., Bai, C., and Shi, K. (2021) Uniaxial Tensile Behavior, Flexural Properties, Empirical Calculation and Microstructure of Multi-Scale Fiber Reinforced Cement- Based Material at Elevated Temperature. Materials 14(8), 1827.

20

Ohama, Y. (1998) Polymer-Based Admixtures. Cement and Concrete Composites 20(2-3), 189-212.

21

Rossen, J. E., Lothenbach, B., and Scrivener, K. L. (2015) Composition of C-S-H in Pastes with Increasing Levels of Silica Fume Addition. Cement and Concrete Research 75, 14-22.

22

Scrivener, K. L. (2004) Backscattered Electron Imaging of Cementitious Microstructures: Understanding and Quantification. Cement and Concrete Composites 26(8), 935-945.

23

Sheen, D. H., Kang, S. H., Roh, J. H., and Ryu, Y. S. (2002) Properties and Usages of Sulfur Concrete as Construction Material. Korean Society of Civil Engineers Magazine 50(6), 39-45. (In Korean)

24

Su, Z., Sujata, K., Bijen, J. M., Jennings, H. M., and Fraaij, A. L. A. (1996) The Evolution of The Microstructure in Styrene Acrylate Polymer-Modified Cement Pastes at the Early Stage of Cement Hydration. Advanced Cement Based Materials 3 (3-4), 87-93.

25

Xie, C., Cao, M., Si, W., and Khan, M. (2020) Experimental Evaluation on Fiber Distribution Characteristics and Mechanical Properties of Calcium Carbonate Whisker Modified Hybrid Fibers Reinforced Cementitious Composites. Construction and Building Materials 265, 120292.

26

Yoon, J. H. (2004) An Experimental Study on the Manufacturing of Sulfur Concrete. Journal of the Architectural Institute of Korea Structure and Construction 20(9), 143-148. (In Korean)

27

Yoon, J. H. (2005) An Experimental Study on Physical Properties of Sulfur Concrete. Journal of the Architectural Institute of Korea Structure and Construction 21(11), 143-150. (In Korean)

28

Yoon, J. H. (2006) An Experimental Study on Durability of Sulfur Concrete. Journal of the Architectural Institute of Korea Structure and Construction 22(6), 95-102. (In Korean)

29

Yoon, J. H., and Heo, H. S. (2003) An Experimental Study on the Manufacturing of Sulfur Mortar. Journal of the Architectural Institute of Korea Structure and Construction 19(11), 93-99. (In Korean)

JKCIJournal of
the Korea Concrete Institute

Journal of the Korea Concrete Institute

ISO Journal TitleJ Korea Concr Inst.

Journal Search

Journal XML

References

JKCIJournal ofthe Korea Concrete Institute