1.Kennedy, R. P., “A Review of Procedures for the Analysis and Design of Concrete Structures”, Nuclear Engineering and Design, Vol.37, No.2, 1976, pp.183-203.

2.Army Corps of Engineers, “Fundamentals of Protective Design”, Report AT120 7821, 1946.

3.Hughes, G., “Hard Missile Impact on Reinfoced Concrete”, Nuclear Engineering and Design, Vol.77, 1984, pp.23-35.

4.Almansa, E. M. and Canovas, “Behavior of Normal and Steel Fiber-Reinforced Concrete under Impact of Small Projectiles”, Cement and Concrete Research, Vol.29, 1999, pp.1807-1814.

5.Kim, S. H., Kang, T. H. K., Hong, S. G., Kim, G. Y., and Yun, H. D., “Impact Resistance of Steel Fiber-Reinforced Concrete Panels Under High Velocity Impact-Load”, Journal of the Korea Concrete Institute, Vol.26, No.6, 2014, pp. 731-739 (in Korean).

6.Jang, S. J., Ahn, K. L., and Yun, H. D., “Effects of Aggregate Size and Fiber Volume Fraction on Flexural Properties of Steel Fiber Reinforced Concrete (SFRC)”, Journal of the Architectural Institute of Korea, Vol.31, No.2, 2015 (in Korean).

7.Kim, H. S., Nam, J. S., Hwang, H. K., Jeon, J. K., and Kim, G. Y., “A Stduy on the Penetration Resistance and Spalling Properties of High Strength Concrete by Impact of High Velocity Projectile”, Journal of the Korea Concrete Institute, Vol.25, No.1, 2013, pp.99-106 (in Korean).

8.Marar, K., Eren, O., and Celik, T., “Relationship Between Impact Energy and Compression Toughness Energy of High- Strength Fiber-Reinforced Concrete”, Materials Letters, Vol.47, 2001, pp.297-304.

9.Korea Standards Association, “KS F 2405. Standard Test Method for Compressive Strength of Concrete”, 2010 (in Korean).

10.Ahn, K. L., Jang, S. J., Yun, Y. J., D. G., and Yun, H. D., “Effect of Fiber Volume Fraction on Compressive and Flexural Properties of High- Strength Steel Fiber Reinforced Concrete”, Applied Mechanics and Materials, Vol.597, 2014, pp.296-299.

11.Korea Standards Association, “KS F 2408. Method of Test for Flexural Strength of Concrete”, 2000 (in Korean).

12.ASTM C 1609, “Standard Test Method for Flexural Performance of Fiber-Reinforced Concrete (Using Beam With Third-Point Loading)”, American Society for Testing Materials, 2012.

13.Ezeldin, A. S. and Balaguru, P. N., “Normal and High Strength Fiber Reinforced Concrete Under Compression”, Journal of Materials in Civil Engineering, Vol.4, No.4, 1992, pp.415-429.

14.Montaignac, R., Massicotte, B., Charron, J., and Nour, A., “Design of SFRC Structural Elements: Post-Cracking Tensile Strength Measurement”, Materials and Structures, Vol. 45, 2012, pp.609-622.